Molex connector is the vernacular term for a two-piece pin and socket interconnection, most frequently disk drive connectors. Pioneered by Molex Connector Company, the two-piece design became an early electronic standard. Molex developed and patented the first examples of this connector style in the late 1950s and early 1960s. First used in home appliances, other industries soon began designing it into their products from automobiles to vending machines to mini-computers.
In such a connector, cylindrical spring-metal pins fit into cylindrical spring-metal sockets. The pins and sockets are held in a rectangular matrix in a nylon shell. The connector typically has two to 24 contacts and is polarized or keyed to ensure correct orientation. Pins and sockets can be arranged in any combination in a single housing, and each housing can be either male or female.
There are three typical pin sizes: 1.57 mm (0.062 in), 2.13 mm (0.084 in), and 2.36 mm (0.093 in). The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power.
In October 1963 AMP (now a division of Tyco International) introduced the MATE-N-LOK connector. The AMP connector was similar to the patented Molex connectors but not interchangeable. Both were widely used in the computer industry and the term "Molex Connector" became a generic name for nylon plugs and receptacles.
The first 5.25 inch floppy disk drive, the Shugart SA400, introduced in August 1976 used the AMP MATE-N-LOK connector part number 350211-1. This connector became the standard for 5.25 inch format peripherals such as hard drives and was used until introduction of SATA drives. In 1983, Molex introduced the 8981 connector that was fully compatible with the AMP MATE-N-LOK connector.
Desktop PC use
Several connector types have become established for connecting power in desktop PCs, because of the simplicity, reliability, flexibility, and low cost of the Molex design. Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.
Motherboard power connector (Molex Mini-fit Jr. 5566-20A or 5566-24A)
In 20/24 pin configurations, the Mini-Fit Jr. connector may be used on ATX motherboards as the main power connector. 4, 6 and 8 pin configurations of the same style of connector are used for additional CPU power and graphics card power. This is changing as power, signal and speed requirements increase in sophistication and electronic requirements. More commonly, the Mini-Fit, Jr. can be found in consumer applications, such as white goods, requiring high density and high current.
These connectors are polarized so that they usually cannot be inserted incorrectly, and lock into position using a latch.
Standard pinout:
Power good goes high to indicate that voltages are stabilised and ready for use. Power on is internally driven high, and shorting this pin to ground will turn on the power supply.
Disk drive connector (AMP MATE-N-LOK 1-480424-0 Power Connector)
The desktop computer hard-drive connector is pictured here. It has 4 conductors, with the standard pinout as follows:
Sometimes, especially in older computers, the colors differ. The pins are 0.200 in (5.08 mm) apart (center to center). The connector housing has chamfered corners on one side to prevent the user from plugging it in incorrectly. The connector that provides power (e.g., on a power supply) has female pins and a male housing; the connector that receives power (e.g., on a peripheral) has male pins and a female housing.
The connector is standard on all 5.25 in floppy drives, PATA disk drives and non-SCA SCSI disk drives; however, newer SATA disk drives employ a more advanced interconnection with 15 contacts. These advanced connection systems were first developed by Molex and other connector companies, often working together to develop interconnection standards. As SATA becomes more prevalent, Molex connectors can be found repurposed, through use of an adaptor, to serve as six-pin PCI-E power connectors to make up for a lack of such connectors on a power supply.
Lower power devices (e. g. 3.5 in floppy drives) use the smaller AMP 171822-4 connector instead.
Despite its widespread adoption, the connector does have problems. It is difficult to remove because it is held in place by friction instead of a latch, and some poorly constructed connectors may have one or more pins detach from the connector during mating or demating. There is also a tendency for the loosely inserted pins on the male connector to skew out of alignment. The female sockets can spread, making the connection imperfect and subject to arcing. Standard practice is to check for any sign of blackening or browning on the white plastic shell, which would indicate the need to replace the arcing connector. In extreme cases the whole connector can melt due to the heat from arcing.
See also
- Electrical connector
- DC connector
- Berg connector
- JST connector
- CMOS rechargeable battery
References
External links
- Wire-to-Board 5.08mm (.200") Disk Drive Power Connection System Connector - Male IDT
Interesting Informations
Looking products related to this topic, find out at Amazon.com
Source of the article : here
EmoticonEmoticon