Whitewash - Cost To Power Wash House

- 14.40

Whitewash, or calcimine, kalsomine, calsomine, or lime paint is a low-cost type of paint made from slaked lime (calcium hydroxide) and chalk (whiting). Various other additives are also used.

Whitewash and Seal a Butcher Block Counter Top | The DIY Mommy



Whitewash

Whitewash cures through a reaction with carbon dioxide in the atmosphere to form calcium carbonate in the form of calcite, a reaction known as carbonation.

When the paint initially dries it is uncured and has almost no strength. It takes up to a few days, depending on climate, to harden.

It is usually applied to exteriors; however, it is traditionally used internally in food preparation areas, particularly rural dairies, for its mildly antibacterial properties. Occasionally it is coloured and used on structures such as the hallways of apartment buildings, but it is not popular for this as it can rub off onto clothing to a small degree. In Britain and Ireland, whitewash was used historically, both externally and internally, in workers' cottages, and still retains something of this association with rural poverty. In the United States, a similar attitude is expressed in the old saying: "Too proud to whitewash and too poor to paint", with the connotation that whitewash is a cheap imitation of "real" paint.

Whitewash is especially effective on adobe-like materials because it is absorbed easily and the resultant chemical reaction hardens the medium. Also, whitewash and adobe are both very low cost building materials.

Farming applications

Whitewash is applied to trees, especially fruit trees, to prevent sun scald. Most often only the lower trunk is painted. In Poland painting the whole trunk is also said to help keep the body of the tree cool in late winter/ early spring months and hence help prevent fruit trees from blooming too soon i.e. when warm sunny days could promote rapid tree warming, rising sap and bloom and intermittent frosty nights could damage outer tree rings and destroy the young buds and blossoms.

In the middle of the 20th century, when family farms with dairy barns were common in the Upper Midwest of the USA, whitewash was a necessary part of routine barn maintenance. A traditional animal barn contains a variety of extremely rough surfaces that are difficult to wash and keep clean, such as stone and brick masonry, and also rough-cut lumber for the ceiling. Left alone these surfaces collect dust, dirt, insect debris and wastes, and can become very dirty. Whitewash aids in sanitation by coating and smoothing over the rough surfaces. Successive applications of whitewash build up layers of scale which flake off and in the process remove surface debris with it. The coating also has antimicrobial properties that provide hygienic and sanitary benefits for animal barns.

Typically the farm whitewash application is an annual process and has the following steps:

  • Surfaces that are to be protected from whitewashing are enclosed in plastic sheeting or bags, such as windows, light fixtures, and the milk pipeline in a dairy barn.
  • The interior is stripped of all removable equipment leaving walls, floors, and ceiling as bare as possible.
  • A high volume compressed air wand is used to blast away loose whitewash scale from the walls and ceiling. This loose debris is swept into the barn gutter and goes into the manure handling system where it eventually contributes to soil fertility.
  • A mobile whitewashing trailer is used to mix the quicklime into a thick liquid, which is then sprayed as an even coating over the interior walls, ceiling, and posts, into all accessible nooks and crevasses.
  • The coating is allowed a few hours to dry and stop dripping from the ceiling, and the protective plastic coverings are removed. Eventually after the walls and ceilings have dried sufficiently, equipment is brought back into the barn.

Nonremovable electric equipment is often enclosed in protective outer shells that prevent whitewash intrusion. For example circuit breaker panels may be enclosed within wooden cabinetry which keeps the whitewash spray coating from entering the panel.



Limewash

Lime wash is pure slaked lime in water. It produces a unique surface glow due to the double refraction of calcite crystals. Limewash and whitewash both cure to become the same material.

When limewash is initially applied it has very low opacity, which can lead novices to overthicken the paint. Drying increases opacity, and subsequent curing increases opacity even further.

Whitewash and Seal a Butcher Block Counter Top | The DIY Mommy


Additives

Additives that have been used include water glass, glue, egg white, Portland cement, salt, soap, milk, flour, soil.

Whitewash is sometimes coloured with earths to achieve colours spanning the range of broken white, cream, yellow and a range of browns.

The blue laundry dye (such as Reckett's 'Dolly Blue' in the UK, Ireland and Australia, Loulaki in Greece, or Mrs. Stewart's Bluing in North America) formerly widely used to give a bright tinge to boiled white textiles was a common 19th Century addition and gives a pale blue paint.

Historically pig's blood was added to give the colour Suffolk pink, a colour still widely used on house exteriors in some areas of the UK. Excessive animal blood (iron oxide) can compromise the lime binder's strength.

Pozzolanic materials are occasionally added to give a much harder wearing paint finish. This addition, however, creates a short open time, and therefore requires timely application of the altered paint.

Linseed oil is sometimes added (typically 0.5-2%) to improve adhesion on difficult surfaces.

Cement addition makes a harder wearing paint in white or grey. Open time is short, so this is added at point of use. However, the use of cement restricts the breathable aspects of the limewash; Cement should not be applied to historic buildings in general.

Dilute glues improve paint toughness.

Wheat flour has been used as a strength enhancing binder. Salt is usually added to prevent the flour going mouldy later in damp conditions. The use of salt brings its own issues, such as deterioration of brick and stone.

A Limewashed Facelift for my Exterior • Segreto Secrets


Limitations

Basic limewash can be inadequate in its ability to prevent rain driven water ingress. Additives are being developed but these have the potential for affecting free vapour permeability, for this reason silicate paints, more common in Germany, are gaining popularity in the UK over limewash.

Array

Cost

Simple lime paints are very low cost. A 25 kg bag of lime makes around 100 kg of paint, and costs around £6 in the UK (2008).

Array

In popular culture

The incident of Tom Sawyer whitewashing a fence as punishment is a famous image in American literature. It appears in The Adventures of Tom Sawyer, written in 1876 by Mark Twain.

"White washing" has become a derogatory metaphor for historically institutionalized discriminatory practices by white people in an attempt to "civilize" ethnic minorities.

Array

See also

  • Lime plaster
  • Lime mortar
  • Silicate paint
Array

References

  1. ^ "California Agriculture PDF". ucce.ucdavis.edu. June 1970. Retrieved February 12, 2014. 
  2. ^ "Fias Co Farm/Recipes- whitewash". Fiascofarm.com. Retrieved 2014-02-03. 


External links

  • Lighthouse keeper's formula for White Wash at Crisp Point Light.
  • Paper on Whitewashing including mixes etc by Peter Mold & Richard Godbey




Interesting Informations

Looking products related to this topic, find out at Amazon.com

Source of the article : here





EmoticonEmoticon

 

Start typing and press Enter to search